Dimensional Weight Calculator
Dimensional, or volumetric, weight is the box volume divided by a carrier divisor, and the billable weight is typically the larger of that figure and the actual scale weight. Enter length, width, height, the actual weight, and — this is required — the divisor from your carrier’s current published guide, in the same length and weight units as the box and the actual weight. Official UPS, FedEx and USPS pages could not be retrieved when this tool was researched on 15 November 2026, so this page never fills a divisor for you and never treats a typed example (including 139) as an official current rule. Confirm the divisor, the unit and any rounding with the carrier’s current guide. This is not a shipping quote.
Dimensional weight calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the dimensional weight calculator
- Measure the box and the actual weight. Use the same length unit on all three sides, and the same weight unit you want for the result.
- Type the divisor from the carrier’s current guide. The divisor is not optional and is not filled in for you. An example such as 139 is only a number you might type; it is not an official rule on this page.
- Read dimensional and billable weight. Dimensional weight is volume ÷ divisor. Billable weight is the larger of that and the actual weight. Confirm rounding with the carrier.
The identity
Dimensional weight = (length × width × height) ÷ divisor. Billable weight is the larger of actual weight and dimensional weight. That is all this page computes. The divisor, and the units it is published in, come from the carrier. Because official UPS, FedEx and USPS pages could not be retrieved here on 15 November 2026 — one denied access, one failed a firewall check, and one returned not found — the divisor field starts empty and stays empty until you type a figure from a guide you trust.
An example that uses 139 is only a demonstration of the arithmetic. It is not a statement that 139 is anyone’s current official divisor. Divisors change, and they differ by service and by unit system.
What is left out
No zone chart, no rate table, no girth rule beyond the three sides you type, and no automatic rounding. This is also not an invoicing product; it will not prepare a bill. Confirm the number you will be charged with the carrier’s current published guide and quote.
Copy result, Copy link, Reset, Print and Save PDF work as on the other tools. The diagram compares dimensional, actual and billable weight, and is included in the report.
Worked identity (unit-tested)
- 20 × 16 × 12, divisor 139 (typed), actual 10 → dimensional weight 3,840 / 139, billable = max(actual, dimensional).
That identity is tested against the same TypeScript function the browser runs. Report a mistake from the about box if the product or the max() disagrees with the arithmetic above.
Frequently asked questions
What is the billable weight of a 20 × 16 × 12 box, actual weight 10, divisor 139?
Volume is 3,840. Dimensional weight is 3,840 ÷ 139 ≈ 27.63. Billable weight is the larger of 10 and 27.63, so about 27.63 in the same unit as the actual weight. That identity is unit-tested. 139 is a typed example, not a carrier rule stated by this page.
Why is the divisor blank until I type it?
Because official UPS, FedEx and USPS dimensional-weight pages could not be retrieved on 15 November 2026, and this site will not invent a divisor. Enter the figure from the guide you are actually shipping under.
What units should I use?
The same length unit on L, W and H, and a divisor published for those units and for the weight unit of the actual weight (for example cubic inches per pound). Mixing inches with a centimetre divisor is wrong.
Does the page round the way my carrier does?
No automatic rounding rule is applied, because those rules were not available from an official page we could retrieve. If your guide says to round up to the next pound, do that after you read the result.
Is this a shipping quote?
No. It is the volume ÷ divisor identity and a max() with actual weight. Rates, surcharges, zones and packaging rules are omitted.
Can I use this for invoices or billing?
It is a cubing identity for a parcel, not an invoicing tool. It will not create a bill, a VAT line or a packing list.
What if I leave the divisor blank?
The engine asks you to enter it. It will not quietly assume 139 or any other number.
Related calculators
Cubic Feet Calculator
Volume in ft³ with yd³, m³, litres and gallons.
Volume Calculator – Box, Cylinder, Sphere, Cone and Pyramid
Volume of a box, cube, cylinder, sphere, cone, pyramid or hemisphere.
Unit Converter
One converter for length, area, volume, weight, temperature, speed and more.
Kilograms to Pounds Converter
Kilograms to pounds (and back), with ounces, grams and stone.
Cubic Yard Calculator
Cubic yards, cubic feet and m³ for soil, mulch, fill and more.
Sources and references
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 15 November 2026. See our editorial policy. If you spot a mistake, report it.
Conversion factors come from NIST and other standards bodies, and results are rounded for display. For safety-critical work such as medicines, engineering or navigation, verify with an authoritative source. Read the disclaimer.