Shoe Size Converter
Enter a measured foot length in millimetres or inches. Mondopoint, in ISO 9407, is the foot length in millimetres. Approximate UK adult and US sizes use the foot-length formulas described on Wikipedia “Shoe size” (retrieved 15 November 2026): UK adult ≈ 3 × foot length in inches − 23; US men’s Brannock-style size ≈ 3 × foot length in inches − 22 (men’s size 1 is a 7 2/3 inch foot); a commonly described women’s scale is men’s size + 1.5. Those UK and US identities are labelled approximate in that article. This is not a fitting, not a width system, not a children’s scale, and not a brand last. ISO/TS 19407 conversion tables are not reproduced here because a free official table was not available.
Shoe size converter
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the shoe size converter
- Measure the foot, not the shoe. Use millimetres or inches. Mondopoint is that length, rounded to the nearest millimetre.
- Read Mondopoint first. A 260 mm foot is Mondopoint 260. That mark is the official length system this page can state without an approximation.
- Treat UK and US figures as approximate. They use the Wikipedia formulas named in the intro, not a shop device and not ISO 19407 tables. Try shoes on, or measure with the shop’s device, before you buy.
Mondopoint first
Mondopoint is the clean official mark this page can give you: the foot length in millimetres, as ISO 9407 defines the system (described on Wikipedia “Shoe size,” retrieved 15 November 2026). A 260 mm foot is Mondopoint 260. Measure the foot, not the insole of a shoe you already own, if you want that mark to mean what the standard says.
Approximate UK and US formulas
The Wikipedia article, retrieved on the same date, also states approximate adult formulas based on foot length in inches: UK adult ≈ 3 × foot length − 23, and a Brannock-style US men’s scale in which size 1 is a 7 2/3 inch foot, equivalent to 3 × foot length − 22. A commonly described women’s scale is the men’s size plus 1.5. Those formulas are labelled approximate on this page because the article itself uses “approximately,” and because last length, allowance and brand numbering vary. They are not ISO 19407 conversion tables. A free official 19407 table was not available, so none is invented here.
Widths, children’s scales and Continental last systems are omitted rather than guessed. If you are buying shoes, use Mondopoint or a measured length as a starting point and try the pair on, or use the shop’s measuring device.
Copy result, Copy link, Reset, Print and Save PDF work as on the other tools. The diagram lists Mondopoint and the approximate UK and US figures, and is included in the report.
Worked identity (unit-tested)
- A 260 mm foot is Mondopoint 260.
That identity is tested against the same TypeScript function the browser runs. Report a mistake from the about box if Mondopoint disagrees with the length you entered, or if a UK or US figure disagrees with the Wikipedia formulas cited here.
Frequently asked questions
What is Mondopoint for a 260 mm foot?
260. Under ISO 9407, the Mondopoint length mark is the foot length in millimetres. That identity is unit-tested.
How are the UK and US sizes calculated?
From the approximate formulas on Wikipedia “Shoe size,” retrieved 15 November 2026: UK adult ≈ 3 × foot length in inches − 23; US men ≈ 3 × foot length in inches − 22; a common women’s scale is the men’s size plus 1.5. The article itself calls those identities approximate. Brands and lasts vary.
Why are official EU conversion tables missing?
ISO/TS 19407:2023 tables were not freely extractable as a usable official table when this page was researched on 15 November 2026. This page will not invent an EU size chart.
Is this a fitting guarantee?
No. Foot length is only one measurement. Width, instep, last shape and brand numbering all change the shoe that actually fits. Try shoes on.
Does this cover children’s sizes?
No. Children’s scales are omitted rather than guessed. Mondopoint still reports the foot length in millimetres, which you can take to a fitter.
Can I enter inches?
Yes. Inches are converted at 25.4 millimetres per inch, then Mondopoint is the length in millimetres. The UK and US approximations also start from that length.
How is this different from the ring-size converter?
Ring sizes on this site use a cited ISO / standard table for circumference. Shoe UK and US figures here are approximate formulas only, and they are labelled that way.
Related calculators
Ring Size Converter – US, UK, EU/ISO and Asia
Convert a ring size among US, UK, EU/ISO, diameter and Asia using a cited table.
Centimetres to Inches Converter
Centimetres to inches (and back) with a table and exact formula.
Inches to mm Converter
Inches to millimetres and back, with nearest-fraction output.
Unit Converter
One converter for length, area, volume, weight, temperature, speed and more.
Feet to Inches Converter
Feet to inches (and back) with yards, metres and a table.
Sources and references
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 15 November 2026. See our editorial policy. If you spot a mistake, report it.
Conversion factors come from NIST and other standards bodies, and results are rounded for display. For safety-critical work such as medicines, engineering or navigation, verify with an authoritative source. Read the disclaimer.