Grass Seed Calculator
Find out how much grass seed to buy. Enter your lawn size, choose the grass type and whether you are starting from bare soil or overseeding, and get the pounds or kilograms of seed with a low, high and midpoint figure, plus straw mulch bales and bag counts.
Grass seed calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the grass seed calculator
- Measure the lawn. Choose rectangle or circle, or type the area. Subtract paths and beds.
- Choose the grass type. Pick the species or blend. The rates shown come from university extension guides for new lawns.
- Pick the job. Choose new lawn for bare soil or overseeding for a thin lawn, which uses half the rate.
- Enter your bag size. Type the seed bag weight to see how many bags to buy.
- Read the result. Use the range as a guide, apply half the seed in each direction, and check the label of your seed.
Grass seed calculator formula
Seed (lb) = lawn area (ft²) ÷ 1,000 × rate (lb per 1,000 ft²)
Overseeding rate = ½ × new-lawn rate
Extension services publish seeding rates in pounds per 1,000 square feet, so the calculator converts your area to thousands of square feet and multiplies. Because sources differ slightly, it gives a low, high and midpoint figure rather than one false-precise number.
Seeding rates used
| Grass | New lawn, lb per 1,000 ft² |
|---|---|
| Kentucky bluegrass | 2–3 |
| Tall fescue | 6–10 |
| Perennial ryegrass | 6–9 |
| Fine fescue | 3–6 |
| Bluegrass / ryegrass 80:20 | 3–4 |
| Bluegrass / fine fescue 50:50 | 3–5 |
| Bermudagrass, hulled | 1 |
| Buffalograss | 1.5–2 |
Worked examples
A new bluegrass lawn. 50 × 40 ft is 2,000 ft², so 4 to 6 lb, about 5 lb at the midpoint, which is one 7 lb bag.
A large fescue lawn. 5,000 ft² of tall fescue needs 30 to 50 lb, about 40 lb.
Overseeding. 3,000 ft² with an 80:20 bluegrass and ryegrass blend uses half of 3–4 lb per 1,000 ft², so 4.5 to 6 lb.
A metric lawn. 200 m² is about 2,153 ft². Kentucky bluegrass needs 4.3 to 6.5 lb, or 1.9 to 2.9 kg.
Getting a good stand
Seed in two passes at half the rate each, rake it in lightly and cover with a thin layer of straw, roughly one bale per 1,000 square feet. Keep the seedbed moist until germination, then water deeper and less often. The first mow can happen when the grass reaches about 3 to 3½ inches. Check your seed label, since coated seed and special cultivars may use different rates.
Features
- Eight grass types and blends, new lawn or overseeding.
- Low, high and midpoint seed amounts in pounds or kilograms.
- Straw mulch bales and seed bag count.
- Copy result, reset and a printable report in five themes on A4 or Letter.
Plan the rest of the lawn
Measure odd shapes with the lawn area calculator. A starter feed comes from the lawn fertilizer calculator, instant turf from the sod calculator, and soil improvement from the compost calculator.
Frequently asked questions
How much grass seed do I need per square foot?
Rates are quoted per 1,000 ft². Kentucky bluegrass needs 2 to 3 lb and tall fescue 6 to 10 lb per 1,000 ft² for a new lawn. That is about 0.002 to 0.003 lb per ft² for bluegrass.
How much seed for 5,000 square feet?
For tall fescue at 6 to 10 lb per 1,000 ft², you need 30 to 50 lb. For Kentucky bluegrass at 2 to 3 lb, you need 10 to 15 lb.
How much seed do I need to overseed?
Nebraska Extension says overseeding a thin lawn usually takes half the new-lawn amount, such as 1 to 2 lb of Kentucky bluegrass or 3 to 4 lb of tall fescue per 1,000 ft².
Why are tall fescue rates so much higher than bluegrass?
Tall fescue seed is much larger, so a pound holds far fewer seeds. Tennessee Extension notes that small-seeded species need fewer pounds than large-seeded ones.
Can I put down too much grass seed?
Yes. Illinois Extension warns that exceeding the rates can produce weak, spindly seedlings and disease. More seed does not make a better lawn.
When is the best time to seed a lawn?
Late summer to early fall is ideal for cool-season grasses, with early spring as a second choice. Warm-season grasses are seeded from mid-April to mid-May in California, according to UC IPM.
How should I spread the seed?
Apply half the seed in one direction and half at right angles, rake lightly for seed-to-soil contact, then cover with a thin layer of straw and keep the soil moist.
Related calculators
Lawn Fertilizer Calculator
Pounds of fertilizer and bags needed for your lawn from the N rate and bag analysis.
Lawn Area Calculator
Square feet and acres of an irregular lawn, with quick seed and fertilizer amounts.
Sod Calculator
Square feet, slabs or rolls, and pallets of sod for a new lawn.
Compost Calculator
Cubic yards and bags of compost for lawns, beds and new planting areas.
Sources and references
- UC IPM – Planting turf: planting times and rates for seed
- University of Illinois Extension – Planting a new lawn (rates, spreading, straw)
- Ohio State University – Turfgrass establishment series: species and cultivar selection (seeding rates)
- Nebraska Extension in Lancaster County – Dormant lawn seeding (overseeding at half rate)
- University of Tennessee – Turfgrass establishment (W 160-B)
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 14 November 2026. See our editorial policy. If you spot a mistake, report it.
Results are estimates for planning and ordering. Coverage, soil and plant needs vary with site and product, so check labels and local advice, and follow the manufacturer's instructions for any chemical or fertiliser. Read the disclaimer.