Dilution Calculator

Leave exactly one of C1, V1, C2 or V2 blank and fill the other three to solve C1 × V1 = C2 × V2. Concentrations must use the same unit, and volumes must use the same unit. This is general mixing arithmetic only: not medical, veterinary, pharmaceutical or pesticide advice, and not for preparing medication, injections or clinical dilutions. Confirm any safety-critical dilution with the product label and a qualified professional.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Dilution calculator

–

How to use the dilution calculator

  1. Fill three boxes and leave one blank. The blank is the value to find. Use the same concentration unit for C1 and C2, and the same volume unit for V1 and V2.
  2. Read the missing value. The headline names the missing quantity and the result. The identity used is always C1 × V1 = C2 × V2.
  3. Treat it as mixing arithmetic, not a protocol. The page assumes complete mixing and no volume change on mixing. It will not advise on medication, pesticides or lab protocols.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

The identity

C1 × V1 = C2 × V2 says that the amount of solute is conserved when you dilute (or concentrate) a mixture, provided the units are consistent and the volumes add in the simple way the identity assumes. Solving for the blank box is then one multiplication and one division. The engine will not invent a fourth value if all four are filled, and it will not guess a unit.

A typical stock-to-working-strength question is: you have a 10% solution and you want 100 mL at 2%. Then V1 = (2 × 100) / 10 = 20 mL of stock, made up to 100 mL with diluent. The same numbers work in any matching volume unit.

Safety

This is not a medical, veterinary, pharmaceutical or pesticide calculator. It will not tell you whether a dilution is safe, sterile or legal. Household cleaners, laboratory reagents and medicines all have labels and procedures that override a bare identity. If a mistake could harm a person, an animal or a surface, stop and use the instructions that came with the product, or ask a qualified professional.

Copy result, Copy link, Reset, Print and Save PDF work as on the other tools. The diagram lists C1, V1, C2 and V2 and is included in the report.

Worked identity (unit-tested)

  • 10% stock to a 2% mixture of 100 volume units requires 20 volume units of stock.

That identity is tested against the same TypeScript function the browser runs. Report a mistake from the about box if a result disagrees with C1V1 = C2V2.

Frequently asked questions

How much 10% stock makes 100 units of 2%?

20 units of stock, because 10 × V1 = 2 × 100, so V1 = 20. That identity is unit-tested. The units must match on each side (for example mL and mL, or % and %).

Can I use this for medicine or injections?

No. This page is not for medication, veterinary dosing, injections or any clinical dilution. Use a qualified professional and the product documentation.

What if I fill all four boxes?

The engine asks you to leave exactly one box blank. It will not silently overwrite a number you typed, and it will not average two conflicting values.

Do the units have to be percent?

No, but both concentrations must share a unit, and both volumes must share a unit. Mixing % with mg/mL, or mL with L, makes the identity wrong.

What about volume change on mixing?

It is ignored. Some solvents do not add exactly. For work that cares about that, use a measured final volume and a method from the product or a laboratory procedure, not this page.

Can concentrations be zero?

A typed zero is allowed where it is not used as a divisor. Finding V1 when C1 is 0 is rejected, because you cannot make a higher concentration from nothing.

Is this the same as a fertilizer or epoxy calculator?

No. Those tools estimate coverage or mix ratios for specific products. This page is the bare C1V1 = C2V2 identity, with a strong not-for-medicine disclaimer.

Sources and references

    About this calculator

    Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 15 November 2026. See our editorial policy. If you spot a mistake, report it.

    Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.

    Calculator by CalcTen — free online calculators.