Sand Calculator
Find out how much sand you need for a paver base, a sandbox, a pool pad or levelling a patio. Enter the area and depth, choose dry, damp or wet sand, and get cubic yards, tons, tonnes and the number of bags to buy.
Sand calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the sand calculator
- Enter the area. Choose rectangle or circle and type the length and width, or the diameter. In imperial you can use feet and inches, such as 14' 6".
- Set the compacted depth. Enter the finished depth in inches (centimetres in metric). Paver bedding is typically 1 inch; a sandbox is often 6 to 12 inches.
- Choose the sand condition. Pick dry, damp or wet sand. Moisture changes the weight, not the volume. Use a custom density if your supplier gives one.
- Add an allowance and bag weight. Keep 10% for settling and spillage, then enter the bag weight (50 lb is common) to get a bag count.
- Read and save the result. Check cubic yards and tons for bulk delivery, or the bag count for a small job. Copy it or print a report.
Sand calculator formula
Volume (ft³) = Length × Width × Depth × (1 + allowance)
Cubic yards = cubic feet ÷ 27
Weight (lb) = cubic yards × density (lb/yd³)
Bags = weight ÷ bag weight, rounded up
Depth in inches is divided by 12 first. For a circle, area is π × (diameter ÷ 2)². The density depends on moisture. This calculator uses Engineering ToolBox values for dry sand (97 lb/ft³, 2,619 lb/yd³) and wet sand (119 lb/ft³, 3,213 lb/yd³), and Caterpillar’s figure for damp sand (2,850 lb/yd³). Loose, damp sand from a stockpile is usually somewhere between the dry and wet numbers.
Worked examples
Paver bedding. A patio 14 ft × 12 ft with 1 inch of compacted sand: 168 ft² × 1/12 = 14 ft³. With 10% extra that is 15.4 ft³, or 0.57 yd³. Dry sand weighs about 1,494 lb, so 30 bags of 50 lb.
A sandbox. A box 6 ft × 6 ft filled 8 inches deep is 24 ft³ or 0.89 yd³. Dry sand weighs about 2,328 lb (1.16 tons), which is 47 bags of 50 lb, with no allowance.
Sand per 100 ft².
| Depth | Cubic feet | Cubic yards | Dry weight |
|---|---|---|---|
| 1 in | 8.3 | 0.31 | 808 lb |
| 2 in | 16.7 | 0.62 | 1,617 lb |
| 4 in | 33.3 | 1.23 | 3,233 lb |
How deep should sand be?
Depth depends on the job: about 1 inch of bedding sand under pavers, 2 inches over a pool liner base, and 6 to 12 inches in a play area. Sand is also a base for concrete and a common filler, but use crushed stone for structural bases. For stone, see the gravel calculator.
Features
- Rectangle and circle areas with feet-and-inches input.
- Dry, damp and wet density presets, plus a custom supplier density.
- Cubic yards, cubic feet, cubic metres, short tons, tonnes and bags, plus truckloads and optional cost.
- Imperial and metric units with US, UK, Australian and Canadian regions.
- Copy result, reset, and a printable report in five themes on A4 or Letter.
- No sign-up; calculations run in your browser.
Tips
- Compact before you measure. Sand loses volume when compacted. Enter the finished depth and keep the allowance.
- Keep it dry in transit. Wet sand is heavier, so a trailer load may weigh more than the dry figure suggests.
- Order by weight or volume as your supplier does. Quarries sell tons or yards; garden centres sell bags. The cubic yards to tons calculator converts between them.
- Fill first, level second. Need dirt instead? Use the dirt calculator.
Frequently asked questions
How do I calculate how much sand I will need?
Multiply length × width × depth in feet to get cubic feet, divide by 27 for cubic yards, then multiply by the sand's weight per yard. For 100 ft² at 2 inches deep that is 16.7 ft³, or 0.62 yd³.
How much sand do I need for 100 square feet?
At 1 inch deep, 100 ft² needs 8.3 ft³ (0.31 yd³). At 2 inches it is 0.62 yd³, and at 4 inches 1.23 yd³, before any allowance.
How many bags of sand is 1 cubic yard?
One cubic yard of dry sand weighs about 2,619 lb, so about 52 bags of 50 lb. Bagged "play sand" is often sold by weight and some bags state their volume, so check the label.
How much does a 50 lb bag of sand cover?
Dry sand is about 97 lb/ft³, so a 50 lb bag holds roughly 0.5 ft³. That covers about 6 ft² at 1 inch deep, or 3 ft² at 2 inches.
How much sand do I need for pavers?
Interlocking paver guidance from the ICPI calls for about 1 inch of compacted bedding sand over the base, so 100 ft² needs roughly 0.31 yd³ plus allowance. Do not use the bedding layer to fill dips in the base.
How many tons is a cubic yard of sand?
About 1.3 short tons for dry sand, 1.4 for damp and 1.6 for wet, based on published densities. Your supplier's ticket weight is the final word.
Is play sand the same as paver sand?
No. Play sand is fine and washed for children's use. Paver bedding sand is coarser and sharper so it locks and drains. Ask your supplier for the right grade for the job.
Related calculators
Dirt, Topsoil & Fill Dirt Calculator
Cubic yards, tons, bags and truckloads of dirt, topsoil or fill.
Cubic Yards to Tons Calculator
Convert cubic yards to tons (and back) by material density.
Gravel Calculator
Cubic yards, tons, m³ and tonnes of gravel or crushed stone for any area.
Concrete Calculator
Cubic yards, m³ and premix bag counts for slabs, footings, post holes and steps.
Sources and references
- Engineering ToolBox – Dirt and Mud densities (sand dry 97 lb/ft³, wet 119 lb/ft³)
- Caterpillar – Material density tables to help estimate earthwork volumes (damp sand)
- Interlocking Concrete Pavement Institute – paver installation guidance (1 in bedding sand)
- NIST – Unit conversion (yard, foot, pound and ton definitions)
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 14 November 2026. See our editorial policy. If you spot a mistake, report it.
Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.