Wallpaper Calculator

Work out how many rolls of wallpaper you need using the drop method that decorators use. Enter the total width of the walls, the height, the roll width and length, and the pattern repeat; the calculator finds how many full-height drops you need, how many drops fit on each roll, and the number of rolls to buy.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Wallpaper calculator

ft
ft
ft
in
ft
in
in
–

How to use the wallpaper calculator

  1. Measure the wall width. Add the widths of all walls to be papered. Skip doors and full-height windows by entering their width in the skip field.
  2. Measure the wall height. Measure from skirting or baseboard to ceiling or cornice at the highest point.
  3. Enter the roll size. Check the label for roll width and length. Standard UK and European rolls are 0.53 m × 10.05 m; US single rolls are often about 20.5 in × 16.5 ft and sold in double rolls of about 33 ft.
  4. Enter the pattern repeat and trim. Enter the vertical pattern repeat from the label (0 for a random match) and a trim allowance for top and bottom.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

Wallpaper is estimated by drops, not by area. A drop is one full-height length cut from the roll, and offcuts that are too short for another drop are wasted. Pattern repeats add more waste, because each drop has to start at the same point in the pattern. This calculator uses the drop method so the result matches what you will actually hang.

The formula explained

Drops needed = ⌈ (Wall width − Skipped width) ÷ Roll width ⌉
Drop length = Wall height + Trim + one Pattern repeat
Drops per roll = ⌊ Roll length ÷ Drop length ⌋
Rolls = ⌈ Drops needed ÷ Drops per roll ⌉

Why not just divide areas? An area method assumes every scrap of paper is used. In practice, if a roll is 10.05 m long and each drop is 2.5 m, you get four drops and a 5 cm offcut. If each drop is 2.6 m, you only get three drops and a 2.25 m offcut that might fill above a door but not a full wall.

Worked examples

Example 1: UK living room, plain paper

Walls totalling 14 m, 2.4 m high, standard 0.53 × 10.05 m rolls, 10 cm trim, no repeat:

  1. Drops: 14 ÷ 0.53 = 26.4 → 27 drops.
  2. Drop length: 2.4 + 0.1 = 2.5 m.
  3. Drops per roll: 10.05 ÷ 2.5 = 4.02 → 4.
  4. Rolls: 27 ÷ 4 = 6.75 → 7 rolls.

Example 2: same room, 64 cm pattern repeat

  1. Drop length: 2.4 m + 0.1 m trim + 0.64 m repeat = 3.14 m. Adding one full repeat to each drop lets you slide the paper up or down to line up the pattern with the previous drop.
  2. Drops per roll: 10.05 ÷ 3.14 = 3.2 → 3.
  3. Rolls: 27 ÷ 3 = 9 rolls.

A large repeat adds two rolls to the same room, which is why it pays to read the label before ordering.

Example 3: US bedroom

Walls totalling 46 ft, skipping a 3 ft doorway, 8 ft high, 20.5 in × 33 ft double rolls, 4 in trim:

  1. Width to cover: 43 ft = 516 in; 516 ÷ 20.5 = 25.2 → 26 drops.
  2. Drop length: 8 ft + 4 in = 8.33 ft.
  3. Drops per roll: 33 ÷ 8.33 = 3.96 → 3.
  4. Rolls: 26 ÷ 3 = 8.7 → 9 double rolls.

Notice that 33 ÷ 8.33 is very close to 4. If your walls are slightly lower or you trim less, you may get four drops per roll, saving two rolls. Measure carefully.

Regional notes: US, UK, Australia and Canada

United States. Wallpaper is often priced per single roll but sold in double (or triple) rolls. Widths vary; check the actual width and length on the label rather than relying on “single roll” area. Many US papers are pre-pasted.

United Kingdom. The standard roll is 0.53 m × 10.05 m. Wider rolls (about 0.7 m or 1.06 m) are common for vinyl and paste-the-wall papers. Batch numbers are printed on the label.

Australia. Most rolls follow the European 0.53 × 10.05 m size; some designer papers are wider. Paste-the-wall non-woven papers are popular.

Canada. Both US and European roll sizes are sold. The calculator’s region switch sets the default roll; you can enter any size.

Tips and common mistakes

  • Check the batch number on every roll and buy from one batch.
  • Measure the highest point of each wall; ceilings are rarely perfectly level.
  • Read the repeat type. The label shows whether the match is straight, offset/drop, or free.
  • Plan the first drop in a less visible corner because the last drop rarely matches perfectly.
  • Feature wall only? Enter just that wall’s width.
  • Keep offcuts for small spaces above doors and below windows.

Painting the other walls? Use the paint calculator. If you are converting roll sizes between inches and millimetres, the feet and inches to mm converter helps.

Plan the rest of the project

Remember to prime and paint adjoining walls: the paint calculator sizes that job, and the square footage calculator helps with feature walls of odd shape.

Frequently asked questions

How do I calculate how many rolls of wallpaper I need?

Divide the wall width by the roll width to get the number of drops. Divide the roll length by the drop length (wall height plus trim plus one pattern repeat) to get drops per roll. Then divide drops by drops per roll and round up.

How many rolls do I need for a 12 × 12 ft room?

It depends on the height and roll size. For 8 ft walls with 20.5 in × 33 ft double rolls and no pattern repeat, the 48 ft perimeter needs 29 drops at 3 per roll, so about 10 double rolls before subtracting doors.

What is a pattern repeat?

The vertical distance before the pattern repeats. Each drop must start at the same point in the pattern, so longer repeats mean more waste and fewer drops per roll.

What is the difference between straight match and drop match?

In a straight match the pattern lines up horizontally across drops. In a drop (offset) match it shifts by half a repeat, which can add a little more waste. The calculator adds one full repeat to every drop, which covers both.

How much should I allow for trimming?

About 5 cm at the top and bottom (10 cm in total, or about 4 in) is a common allowance for trimming to the ceiling and skirting.

Should I subtract doors and windows?

Skip the width of doors and full-height windows. For smaller windows, paper is usually still needed above and below, so most people do not subtract them.

Why buy an extra roll?

Rolls from different print batches may differ slightly in colour. An extra roll from the same batch covers mistakes and future repairs.

What size is a standard roll of wallpaper?

In the UK, Europe and Australia, 0.53 m wide by 10.05 m long (about 5.3 m²). In the US, wallpaper is priced by the single roll but usually sold in double rolls; widths of about 20.5 in or 27 in are common.

Sources and references

About this calculator

Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 1 November 2026. See our editorial policy. If you spot a mistake, report it.

Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.

Calculator by CalcTen — free online calculators.