Artificial Grass Calculator
Size an artificial lawn before you buy. Enter the length and width and your roll width, and get the turf to order, how the strips lay out, the seam length, the excavation, base rock, fine top layer and bags of infill.
Artificial grass calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the artificial grass calculator
- Measure the area. Enter the length and width of the rectangle. For L-shapes or curves, measure the bounding rectangle or use the lawn area calculator first.
- Choose the roll width. Many suppliers sell 15 ft (about 4.6 m) rolls, and in metric markets 2 m and 4 m rolls are common. Check what your supplier stocks.
- Set base depths. Typical installs use 2½ to 3 inches of base rock and 1 to 1½ inches of a fine layer such as decomposed granite. Follow your product's instructions.
- Enter your infill. Use the infill rate and bag size from the product. A common rate is 1.5 to 2 lb per square foot.
- Read the plan. See the strips and seams, how much turf to order, how much soil to dig out and how much base, fine layer and infill to buy.
How the layout works
Strips = ceil(lawn dimension ÷ roll width)
Turf to order = strips × strip length × roll width
Waste = turf ordered − lawn area
The strips can run along the length or along the width. The calculator tests both and uses the one that buys the least turf. Seam length is the number of seams times the strip length, which is how much tape and adhesive you need.
Worked examples
A 30 × 20 ft lawn. From 15 ft rolls, two strips of 20 ft cover it exactly: 600 ft² to order, 1 seam of 20 ft and no waste.
A 25 × 12 ft lawn. Two 12 ft strips cover the 25 ft length, so you order 360 ft² with 60 ft² of trim. Base rock at 3 inches plus 5% is 2.9 yd³, and the fine layer is 1 yd³.
Infill. At 1.75 lb per square foot, 300 ft² needs 525 lb, or 11 bags of 50 lb.
Metric. A 4 × 3 m lawn from a 4 m roll is one 4 m strip: 16 m² ordered, 4 m² waste and no seams. Base rock at 7.5 cm is about 1 m³.
Typical build-up
| Layer | Typical depth |
|---|---|
| Fine layer, such as decomposed granite | 1–1½ in (2.5–4 cm) |
| Compacted base rock | 2½–3 in (6–8 cm) |
| Weed membrane (optional) | On top of soil |
| Excavation | About 4 in (10 cm) total |
Installation tips
Grade the base with about a 2% fall so water drains, and compact each layer thoroughly. Let the turf relax in the sun before trimming, keep the pile pointing the same way, and nail around the edge. Brush the pile up before and after adding infill.
Features
- Rolls of 15 ft, 12 ft, 4 m, 2 m or a custom width.
- Strip layout, waste, seams and perimeter.
- Excavation, base rock with tonnage, fine layer and infill bags.
- Copy result, reset and a printable report in five themes on A4 or Letter.
Related calculators
Measure irregular lawns with the lawn area calculator, compare with real turf using the sod calculator, and size edging paths with the garden path calculator.
Frequently asked questions
How much artificial grass do I need?
You need the lawn area plus trim waste. Because turf comes in fixed-width rolls, you buy whole strips: a 25 × 12 ft lawn from 15 ft rolls needs two 12 ft strips, or 360 ft², even though the lawn is 300 ft².
Which way should the strips run?
The calculator tries both directions and picks the one that wastes the least turf. In practice the pile direction should also face the main viewing point, and every strip must point the same way.
How deep should I excavate?
Watersavers Turf describes 2½ to 3 inches of compacted base rock plus 1 to 1½ inches of decomposed granite, so plan to dig out about 3½ to 4½ inches. Deeper if the soil is soft or the area takes heavy use.
How much infill does artificial grass need?
Rates vary by product, but 1.5 to 2 lb per square foot is common. At 2 lb per square foot, a 50 lb bag covers 25 square feet, so check the label for your turf.
Do I need seams?
Only if the lawn is wider than one roll. Seams are joined with tape and adhesive and are barely visible when the stitch rows are matched.
How much extra turf should I allow?
The strip layout already accounts for trimming. Add a little more if the area has curves, steps or obstacles, and keep one offcut for repairs.
Is a weed barrier necessary?
Many installers lay a woven weed membrane on top of the soil before the base. It is optional, but it helps in areas with persistent weeds.
Related calculators
Lawn Area Calculator
Square feet and acres of an irregular lawn, with quick seed and fertilizer amounts.
Garden Path Calculator
Gravel, base stone, pavers and sand for a garden path or walkway.
Sod Calculator
Square feet, slabs or rolls, and pallets of sod for a new lawn.
Gravel Calculator
Cubic yards, tons, m³ and tonnes of gravel or crushed stone for any area.
Sources and references
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 14 November 2026. See our editorial policy. If you spot a mistake, report it.
Results are estimates for planning and ordering. Coverage, soil and plant needs vary with site and product, so check labels and local advice, and follow the manufacturer's instructions for any chemical or fertiliser. Read the disclaimer.