Garden Path Calculator

Plan a gravel path or a paved walkway before you order. Enter the length and width, choose gravel or pavers, and get cubic yards or metres, tons or tonnes, the paver count with joints and waste, bedding sand, base stone and edging length.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Garden path calculator

ft
ft
in
in
in
in
%
–

How to use the garden path calculator

  1. Choose gravel or pavers. Gravel paths need a surface layer over a compacted base. Pavers need a base, a layer of bedding sand and the pavers themselves.
  2. Enter the path size. Type the length and width. Imperial fields accept feet and inches; metric uses metres.
  3. Pick the paver size and joints. Choose a standard paver size and the joint width. Joints add to each paver's footprint, so wider joints mean fewer pavers.
  4. Set the layer depths. The defaults are 4 inches of compacted base, 1 inch of sand under pavers and 2 inches of gravel on top. Use more base in cold climates or soft soil.
  5. Add waste and order. Keep about 10% for cuts, breakage and settling, then read volumes, weights, the paver count and edging.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

How the numbers work

Volume = path area × layer depth × (1 + extra)
Pavers = area ÷ ((length + joint) × (width + joint)) × (1 + extra)
Weight = volume × bulk density

Each layer is a flat slab, so its volume is area × depth. Weights come from published bulk densities for dry gravel, crushed stone and sand; wet or damp material weighs more, and your supplier’s figure can differ by 10% or more.

Worked examples

Gravel path. 30 × 3 ft is 90 ft². With 2 inches of gravel and 4 inches of base, plus 10%: gravel is 0.61 yd³ (about 0.9 tons) and base stone is 1.22 yd³ (about 1.7 tons). Edging both sides takes 60 ft.

Paver walk. The same 90 ft² with 12 × 12 inch pavers and ⅛ inch joints needs 89 pavers, or 97 with 10% extra. Base is 1.22 yd³ and bedding sand is 0.31 yd³.

Brick-style pavers. 4 × 8 inch pavers on a 10 × 4 ft path (40 ft²): 172 pavers, or 190 with extra.

Metric. A 10 m × 1 m path with 5 cm of gravel and 10 cm of base, plus 10%: 0.55 m³ gravel (about 0.9 tonnes) and 1.1 m³ base (about 1.8 tonnes).

Layers at a glance

LayerTypical depthPurpose
Surface gravel2 in (5 cm)Walking surface
Pavers2⅜ in or moreWalking surface
Bedding sand1 in (2.5 cm)Levels the pavers
Compacted base4 in (10 cm) or moreCarries load and drains
SubgradeCompacted soilFoundation

Tips for a path that lasts

Dig the trench deep enough for all the layers and slope it slightly so water runs off. Compact the base in lifts of no more than 4 inches. Screed the sand without walking on it, and keep the bedding layer to about an inch. Use the larger quantity if you are unsure, since a second delivery usually costs more than a few extra bags.

Features

  • Gravel and paver modes with US and metric units.
  • Seven common paver sizes, adjustable joints and waste.
  • Weights in tons or tonnes, plus edging length.
  • Copy result, reset and a printable report in five themes on A4 or Letter.

For other fill types use the gravel calculator or sand calculator, count patio pavers with the paver calculator, and measure curved beds with the lawn area calculator.

Frequently asked questions

How much gravel do I need for a garden path?

Multiply length × width × depth, then add about 10%. A path 30 ft long and 3 ft wide with 2 inches of gravel is 15 ft³, or about 0.6 cubic yards with the extra.

How deep should a gravel path be?

Plan on about 2 inches of surface gravel over a compacted base of crushed stone. Loose gravel alone shifts and lets weeds through, so the base does most of the work.

How much base does a paver walkway need?

The Interlocking Concrete Pavement Institute shows at least 4 inches of compacted aggregate base and about 1 inch of bedding sand under pavers on a patio or walkway. Soft soils and freezing climates call for a thicker base.

How do I work out how many pavers I need?

Divide the path area by the area of one paver plus its joint. For 12 × 12 inch pavers with ⅛ inch joints, each paver takes up about 1.02 ft², so 90 ft² needs 89 pavers before waste.

How much extra should I order?

Ten percent is a common allowance for straight paths. Curves, diagonal patterns and cut pavers can justify 15% or more.

Do I need edging?

Yes. Edging holds the gravel or pavers in place and stops the edges spreading. The calculator shows the length for both sides of the path.

Should I put landscape fabric under gravel?

A permeable geotextile between soil and base stone can keep the layers from mixing, but it does not stop weeds that seed on top of the gravel. Rake the surface now and then and remove seedlings early.

Sources and references

About this calculator

Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 14 November 2026. See our editorial policy. If you spot a mistake, report it.

Results are estimates for planning and ordering. Coverage, soil and plant needs vary with site and product, so check labels and local advice, and follow the manufacturer's instructions for any chemical or fertiliser. Read the disclaimer.

Calculator by CalcTen — free online calculators.