Lumber Calculator

Plan a lumber order three ways. Build a cut list to get pieces, board feet and cost, count the studs and plates for a wall, or work out how many joists a floor, deck or ceiling needs. Nominal sizes, US, UK and Australian lumber, and a waste allowance are built in.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Lumber calculator

ft
ft
ft
ft
%
–

How to use the lumber calculator

  1. Pick what you are building. Choose a lumber list for a general order, wall framing for studs and plates, or joists for a floor, deck or ceiling.
  2. Enter the sizes and dimensions. For a list, choose a size, a stock length and the number of pieces in up to three rows. For a wall or floor, enter the length, width, spacing and lumber size.
  3. Set spacing, stock length and waste. Pick the stud or joist spacing (16 in on centre is common) and the stock length you will buy. Keep 10% waste or change it.
  4. Add prices if you want a cost. Enter a price per piece to see the estimated total, then read pieces, board feet and linear feet.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

Lumber calculator formulas

Board feet = thickness (in) × width (in) × length (ft) ÷ 12
Studs = ⌈wall length ÷ spacing⌉ + 1, + 2 per corner, + 4 per opening
Joists = ⌈width ÷ spacing⌉ + 1

For a list, the calculator adds your waste percentage to each row and rounds up to whole pieces. In wall mode the plates are three times the wall length (one bottom plate and a double top plate), and the stud cut length is the wall height minus three plate thicknesses. Metric sizes (UK 47 × 100 mm, Australian 90 × 45 mm and so on) use their actual volume.

Worked examples

A lumber list. 20 pieces of 2×4×8 and 6 pieces of 2×6×12 with 10% waste. The 2×4s become 22 pieces at 5.33 bd ft each = 117.3 bd ft. The 2×6s become 7 pieces at 12 bd ft each = 84 bd ft. Total: 29 pieces and 201.3 board feet. At $4 and $9 per piece that is $151.

A 20 ft wall at 16 in. 15 + 1 = 16 studs, plus 12 for two corners and two openings = 28, and 10% waste makes 31 studs. Plates run 60 ft, plus 10% is 66 ft, or 6 twelve-foot boards. Studs cut at 91½ in, so the wall totals about 206 bd ft.

A deck frame. A deck 16 ft wide with 12 ft joists at 16 in on centre needs 13 joists and 4 rim pieces (two 16 ft rims from 12 ft stock): 17 pieces, 19 with waste.

Nominal and actual sizes

NominalActual (in)Board feet per 8 ft
1×6¾ × 5½4.0
2×41½ × 3½5.33
2×61½ × 5½8.0
2×81½ × 7¼10.67
2×101½ × 9¼13.33
4×43½ × 3½10.67

Features

  • Three modes: lumber list, wall framing and joists.
  • Nominal sizes from 1×4 to 6×6, plus typical UK and Australian sizes.
  • Stud and joist spacings in inches or millimetres.
  • Optional price per piece and waste allowance.
  • Copy, reset, and a printable report in five themes on A4 or Letter.

Buying tips

Walls usually need crown-up straight studs, so buy a few extra and sort them. Pressure-treated lumber is for ground contact; keep it for sills and posts. For wood by the cubic measure, see the board foot calculator; for decks, the deck calculator adds boards and fasteners, and the linear feet calculator totals trim and moulding.

Frequently asked questions

How do I calculate how much lumber I need?

List each piece by size and length, count how many you need, add 10% for waste and round up to whole boards. Board feet are thickness (in) × width (in) × length (ft) ÷ 12, using nominal sizes.

How many studs do I need for a wall?

Divide the wall length by the spacing, round up and add one. A 20 ft wall at 16 in is 15 + 1 = 16 studs, then add two for each corner and four for each door or window.

Is a 2x4 really 2 inches by 4 inches?

No. Dry softwood dimension lumber is cut larger and then planed, so a 2×4 is 1½ × 3½ inches under the American Softwood Lumber Standard. Lumber is still priced and tallied by its nominal size.

How many joists do I need for a deck or floor?

Divide the width the joists span across by the spacing, round up and add one. A 16 ft width at 16 in on centre needs 13 joists, plus rim boards at the ends.

What spacing should I use for studs and joists?

Wall studs are usually 16 or 24 inches on centre. Joist spacing depends on the size, species and span, so check span tables or your local code before you buy.

How much waste should I allow?

Ten percent suits straight, simple work. Complex framing, angled cuts or poor-quality boards may need 15% or more, and it helps to leave room for a few crooked pieces.

Why is a precut stud 92⅝ inches long?

An 8 ft wall with one bottom plate and a double top plate uses 4½ inches of plates. A 97⅛ in stack minus the plates leaves 92⅝ in for the stud.

Sources and references

About this calculator

Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 14 November 2026. See our editorial policy. If you spot a mistake, report it.

Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.

Calculator by CalcTen — free online calculators.