Tile Calculator
Work out how many tiles and boxes you need for a floor, wall, splashback or shower. Enter the area, the tile size and the grout joint width, add a waste allowance for cuts and breakages, and the calculator rounds up to whole tiles and whole boxes. It works in inches and feet or millimetres and metres.
Tile calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the tile calculator
- Measure the area. Enter the length and width of the floor or wall. For an L-shaped room, split it into rectangles and add the tile counts, or use the square footage calculator first.
- Enter the tile size. Type the tile's length and width as printed on the box (for example 12 × 12 in or 600 × 300 mm).
- Set the grout joint. Enter the joint width you plan to use. Larger joints mean slightly fewer tiles.
- Add waste and box size. Use about 10% waste for a straight lay and 15% or more for diagonal or herringbone. Enter tiles per box to get a box count, and a price per box for a cost estimate.
Running out of tile halfway through a job is frustrating, and a second order may not match the first. Ordering too many wastes money. This calculator finds the number of tiles for your area, adds a sensible allowance for cuts and breakages, and turns the result into whole boxes.
The formula explained
Each tile effectively covers its own face plus half a joint on every side, which is the same as one full joint on two sides. The calculator divides your area by that “module” area.
Module = (Tile length + joint) × (Tile width + joint)
Tiles (exact) = Area ÷ Module
Tiles to buy = ⌈ Tiles (exact) × (1 + Waste ÷ 100) ⌉
Boxes = ⌈ Tiles to buy ÷ Tiles per box ⌉
Why an area method? It is the standard way suppliers and installers estimate. In reality, cut tiles at the edges mean some pieces are wasted; the waste percentage covers that. If your room is small and narrow, or the tiles are very large, a cut-by-cut layout plan will be more accurate.
Rounding. The calculator only rounds at the end, so the number of whole tiles is not inflated twice.
Worked examples
Example 1: bathroom floor (US)
A floor 10 ft × 8 ft, 12 × 12 in tiles, 1/8 in joints, 10% waste, 10 tiles per box:
- Area: 80 ft² (7.4 m²).
- Module: 12.125 × 12.125 in = 147.0 in² = 1.021 ft².
- Exact tiles: 80 ÷ 1.021 = 78.4.
- With 10% waste: 86.2 → 87 tiles, which is 9 boxes.
Example 2: kitchen floor (UK)
A floor 4 m × 2.5 m, 300 × 300 mm tiles, 3 mm joints, 10% waste, 10 per box:
- Area: 10 m².
- Module: 0.303 × 0.303 = 0.0918 m², so 10.9 tiles per m².
- Exact: 108.9 tiles; with waste: 120 tiles = 12 boxes.
Example 3: large-format wall tiles (Australia)
A shower wall area of 3 m × 2.4 m, 600 × 300 mm tiles, 2 mm joints, 15% waste, 6 per box:
- Area: 7.2 m².
- Exact: 39.6 tiles; with 15% waste: 46 tiles = 8 boxes.
Large tiles waste more at the edges and around niches, so 15% is a sensible allowance.
Choosing a waste allowance
| Layout | Typical allowance |
|---|---|
| Straight lay, simple room | 10% |
| Brick/offset pattern | 10–15% |
| Diagonal (45°) | 15% |
| Herringbone or chevron | 15–20% |
| Large-format tiles, many cuts | 15% or more |
These are rules of thumb used across the trade, not fixed standards. If you are confident in your layout and the room is a simple rectangle, you can go lower; if this is your first tiling job, go higher.
Regional notes: US, UK, Australia and Canada
United States. Tile is sized in inches (12 × 12, 12 × 24, 3 × 6 subway) and boxes list ft² coverage. TCNA publishes the industry’s installation handbook and the ANSI A108/A118 standards that installers follow; typical grout joints are 1/16 to 1/4 in depending on tile type.
United Kingdom. Tiles are sold in millimetres (300 × 300, 600 × 600, 600 × 300) and priced per m² or per box. Typical joints are 2–3 mm for wall tiles and 3–5 mm for floors. British Standard BS 5385 is the main code of practice for tiling.
Australia. Tiles are metric and often sold per m². AS 3958 covers installation of ceramic tiles. Many wet areas use large format porcelain; expect higher waste.
Canada. Both inch and metric sizes are common, and boxes usually show both ft² and m². Choose whichever unit system matches your tile labels.
Tips and common mistakes
- Check the box label for both the tile count and the coverage. Some boxes list a nominal size that is slightly different from the actual tile size.
- Plan the layout from the centre of the room so cut tiles at the edges are at least half a tile wide.
- Buy from one batch and keep at least a few spare tiles for future repairs.
- Consider thickness and weight for walls, especially with large porcelain, and check the substrate is suitable.
- Allow for trims and edge profiles, which are bought separately.
- Work out grout and adhesive with the grout and thinset calculator.
Related tools
For the floor area of irregular rooms, use the square footage calculator. Laying laminate or vinyl instead? Try the flooring calculator.
Frequently asked questions
How do I calculate how many tiles I need?
Divide the area by the area of one tile plus its grout joint, then add waste and round up. A 10 × 8 ft floor (80 ft²) with 12 in tiles and 1/8 in joints needs about 78.4 tiles, or 87 with 10% waste.
How much extra tile should I buy?
A common rule of thumb is 10% extra for straight layouts, and 15% or more for diagonal, herringbone or rooms with lots of cuts. Keep a few spare tiles for future repairs.
Does the grout joint change the tile count?
Yes, slightly. Each tile effectively covers its own size plus one joint. With large tiles the difference is small; with mosaics or wide joints it is noticeable.
How many tiles are in a square metre?
For 300 × 300 mm tiles with a 3 mm joint, about 10.9 tiles per m². For 600 × 300 mm with a 2 mm joint, about 5.5 per m².
How many 12 × 12 tiles are in a box?
It varies by manufacturer and thickness. Boxes are usually labelled with both a tile count and an area in ft² or m²; enter the tile count to get a box total.
Should I subtract doorways and fixtures?
For floors, only subtract large permanent fixtures such as a kitchen island. For walls, subtract windows and doors. Small cut-outs do not reduce waste much.
Why buy from the same batch?
Tiles can vary slightly in shade and size between production runs. Buying all boxes with the same batch or lot code helps them match.
Can I use this for wall tiles and splashbacks?
Yes. Enter the wall width and height as the area length and width. Subtract windows by working out each rectangle separately.
Related calculators
Grout Calculator
Grout volume, weight and bags, plus thinset.
Flooring Calculator
Boxes of laminate, vinyl or hardwood for a room.
Square Footage Calculator
Area of rooms and L-shapes in sq ft, m² and sq yd, with cut-outs and waste.
Drywall Calculator
Sheets of drywall or plasterboard for walls and ceilings.
Sources and references
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 1 November 2026. See our editorial policy. If you spot a mistake, report it.
Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.