Grout and Thinset Calculator

Work out how much grout to buy for a tiling job, and optionally how many bags of thinset or tile adhesive. Enter the tiled area, the tile length and width, the joint width and depth, and the grout density, and the calculator finds the volume of the joints, the weight of grout, and the number of bags including waste.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Grout & thinset calculator

ft²
in
in
in
in
kg/L
lb
%
ft²
–

How to use the grout calculator

  1. Enter the tiled area. Enter the area in ft² or m², the same as for the tile calculator.
  2. Enter tile size and joint. Enter the tile length and width, the joint width, and the joint depth (about the tile thickness).
  3. Check density and bag size. The default density of 1.6 kg/L suits typical cement grouts; use the figure from the product data sheet if it differs. Enter the bag size.
  4. Add thinset coverage. Optionally enter the thinset or adhesive coverage per bag from the bag label to get a bag count.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

Grout fills the joints between tiles, and the amount you need depends on how much joint there is. A floor of large tiles with fine joints uses very little; a mosaic with wide joints uses a lot. This calculator works out the joint volume from your tile size and joint dimensions, converts it to weight and bags, and can also count bags of thinset or tile adhesive.

The formula explained

Joint length per area = (Tile length + Tile width) ÷ (Tile length × Tile width)
Grout volume = Area × Joint length per area × Joint width × Joint depth × (1 + Waste ÷ 100)
Grout weight = Volume (L) × Density (kg/L)
Bags = ⌈ Weight ÷ Bag size ⌉

Why (L + W) ÷ (L × W)? Each tile “owns” one joint along its length and one along its width. Per unit area there are 1 ÷ (L × W) tiles, each contributing L + W of joint, so the total joint length per unit area is (L + W) ÷ (L × W).

Thinset or adhesive. Bags are counted from the area and the coverage per bag that you enter: Bags = ⌈ Area × (1 + Waste) ÷ Coverage ⌉.

Worked examples

Example 1: US bathroom floor

100 ft² of 12 × 12 in tile, joints 1/8 in wide and 3/8 in deep, density 1.6 kg/L, 10% waste:

  1. Grout volume: 2.03 L including waste.
  2. Weight: 2.03 × 1.6 = 3.25 kg = 7.2 lb.
  3. Bags: 1 (25 lb bag).
  4. Thinset at 90 ft² per bag: 110 ÷ 90 → 2 bags.

Example 2: UK kitchen floor

10 m² of 300 × 300 mm tile, 3 mm wide × 8 mm deep joints, density 1.6:

  1. Joint volume: 1.6 L before waste, 1.76 L with 10%.
  2. Weight: 2.82 kg with waste, so a single 5 kg bag.
  3. Adhesive at 5 m² per bag: 11 ÷ 5 → 3 bags.

Example 3: Australian mosaic splashback

6 m² of 100 × 100 mm mosaic, joints 2 mm × 6 mm, 10% waste:

  1. Grout volume: 1.58 L; weight 2.53 kg.

Compare example 2: six square metres of small mosaic need almost as much grout as ten square metres of 300 mm tile.

How tile size affects grout

Tile sizeJointGrout per m² (8 mm deep, no waste)
600 × 600 mm3 mm0.08 L
300 × 300 mm3 mm0.16 L
150 × 150 mm3 mm0.32 L
100 × 100 mm2 mm0.32 L
50 × 50 mm2 mm0.64 L

Calculated with the formula above.

Wall tiles and rectangular tiles

The formula handles rectangular tiles automatically. A 600 × 300 mm tile has (0.6 + 0.3) ÷ 0.18 = 5 m of joint per m², while a 300 × 300 mm tile has 6.67 m per m², so the larger rectangular tile needs about a quarter less grout at the same joint size. Subway tiles of 75 × 150 mm have 20 m of joint per m², about three times as much as 300 mm squares. For walls, use the same inputs; wall tiles are often thinner, so reduce the joint depth to match.

Regional notes: US, UK, Australia and Canada

United States. Grout is sold by weight in pounds (commonly 10 lb and 25 lb bags), and thinset in 50 lb bags. Industry standards (ANSI A118 series, referenced in the TCNA Handbook) define grout and mortar types. Joint widths are given in fractions of an inch.

United Kingdom. Grout is sold in kg (often 1.5, 3, 5 and 10 kg). Adhesive bags list coverage per m² at a given bed thickness. Joints are given in mm.

Australia. Grout and adhesive are sold in kg. AS 3958 covers ceramic tile installation.

Canada. Both imperial and metric bag sizes are sold. Use the unit toggle to match your product.

Tips and common mistakes

  • Use the real joint depth. Rake out adhesive from joints before grouting.
  • Mix small batches and use them within the working time.
  • Choose the right grout type for wet areas, floors and joint width.
  • Seal cement grout where recommended by the manufacturer.
  • Buy one batch to avoid colour differences.

Count the tiles first with the tile calculator. For irregular areas, use the square footage calculator.

Plan the rest of the project

Grout goes with tile and thin-set. Count tiles with the tile calculator, size the adhesive with the mortar calculator, and measure the floor with the square footage calculator.

Frequently asked questions

How much grout do I need?

Grout volume = area × (tile length + tile width) ÷ (tile length × tile width) × joint width × joint depth. Multiply by the grout's density to get weight, and add about 10% waste.

How much grout for 100 square feet?

For 12 × 12 in tiles with 1/8 in joints 3/8 in deep, about 2 litres (7.2 lb) including 10% waste, so a single 10 lb or 25 lb bag is plenty.

Why do small tiles need more grout?

Smaller tiles mean more joints per square foot. Mosaics can need several times as much grout as large-format tiles for the same area.

What is grout density?

The weight of mixed and cured grout per litre. Cement grouts are commonly around 1.6–1.9 kg/L; epoxy grouts differ. Manufacturers often publish coverage calculators or density on their data sheets.

How deep is a grout joint?

Usually close to the tile thickness, minus any adhesive squeeze-out raked out of the joint. Use the tile thickness as a conservative estimate.

How much thinset do I need?

It depends on the trowel notch size and the tile. Bags list coverage at each notch size; for example, a bag might cover about 90 ft² at a 1/4 × 1/4 in notch. Divide your area by that coverage.

Sanded or unsanded grout?

In the US, unsanded grout is typically used for joints of 1/8 in or less and sanded grout for wider joints. Follow the manufacturer's guidance.

Should I buy extra grout?

A 10% allowance covers mixing losses and cleaning. Grout colour can vary between batches, so buy enough for the whole job at once.

Sources and references

About this calculator

Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 1 November 2026. See our editorial policy. If you spot a mistake, report it.

Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.

Calculator by CalcTen — free online calculators.