Mortar Calculator
Estimate how much mortar a brick or block wall needs, in cubic feet, bags and as a cement, lime and sand recipe, or find the bags of thin-set for a tiled floor. Joint thickness, wall openings, brick or block size and waste are all adjustable.
Mortar calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the mortar calculator
- Choose wall or tile. Use wall for brick or block with mortar joints, or tile for thin-set under tile.
- Enter the wall size and units. Type the wall length and height, subtract openings, and select the brick or block size and joint thickness for your region.
- Choose a bag size and waste. Pick your premixed bag. Mortar waste of 15 to 25% is typical; the default is 25%.
- Pick a site-mix recipe if you mix your own. Choose the mortar type to see the sand, cement and hydrated lime quantities by volume.
- Read the result. Compare the volume-based bag count with the conservative bag-label count shown below it, then choose how much to buy.
Mortar calculator method
Units = wall area ÷ ((L + joint) × (H + joint))
Mortar per unit = ((L + joint)(H + joint) − L × H) × depth
Bags = units × mortar per unit × (1 + waste) ÷ bag yield
For hollow concrete blocks the calculator assumes face-shell bedding (mortar only on the two outer shells), which uses much less than a full bed. Bag yield is about 0.83 ft³ for an 80 lb bag, scaled by weight for other sizes. Site mixes use ASTM C270 proportions by volume and assume one volume of damp sand makes about one volume of mortar.
Worked examples
A brick wall. 100 ft² of single-leaf modular brick (7⅝ × 2¼ in, ⅜ in joints): 6.857 bricks per ft² gives 686 bricks. Joints take 13.93 in³ each, so 5.53 ft³; with 25% waste 6.91 ft³, or 9 bags of 80 lb. The bag-label method gives 686 ÷ 37 = 19 bags, the cautious upper figure.
A block wall. 10 ft × 8 ft of 8×8×16 blocks is 80 ft² and 90 blocks. Face-shell mortar is 22.1 in³ per block, so 1.15 ft³ or 1.44 ft³ with waste, 2 bags (7 by the label rule).
Site mix. For 6.91 ft³ of Type S mortar (1 : ½ : 4½), use 6.9 ft³ of sand, 1.5 ft³ of cement (about 1.5 bags of 94 lb) and 0.8 ft³ of hydrated lime.
Thin-set. 100 ft² at 60 ft² per bag with 10% waste is 110 ÷ 60 = 1.83, so 2 bags.
Why two bag counts?
The volume method follows the geometry of the joints. The label method follows the manufacturer’s published coverage, which assumes thicker beds and some loss. Experienced masons often land between them. If you cannot get more mortar quickly, buy toward the higher figure.
Features
- Brick and block sizes for the US, UK, Australia and Canada, with adjustable joint thickness.
- Single or double leaf brick walls, and openings subtracted.
- Premixed bag counts and site-mix sand, cement and lime volumes.
- A tile thin-set mode with your own coverage per bag.
- Copy, reset, and a printable report in five themes on A4 or Letter.
Count the units first with the brick calculator or concrete block calculator. For tiles, pair the thin-set result with the tile calculator and the grout calculator.
Frequently asked questions
How do you calculate how much mortar you need?
Count the bricks or blocks, multiply by the volume of the joints around each unit, then add 15–25% for waste. A modular brick with a ⅜ inch joint uses about 13.9 cubic inches of mortar.
How much thinset mortar do I need for 100 square feet?
With a ¼ × ⅜ inch square-notch trowel, manufacturers list roughly 55 to 70 ft² per 50 lb bag, so 100 ft² needs about 2 bags with 10% waste. Larger notches and large-format tile need more.
How many square feet will a 50 lb bag of mortar cover?
Thin-set coverage depends on the trowel notch and the tile back. About 60 ft² is a common figure with a ¼ × ⅜ inch notch, but the bag or data sheet is the reference.
How many bricks does an 80 lb bag of mortar lay?
QUIKRETE states that an 80 lb bag lays up to 37 standard bricks or 13 standard 8×8×16 blocks. Those figures are cautious because they assume thicker beds than a tidy ⅜ inch joint.
How much mortar for 1,000 bricks?
The Brick Industry Association gives about 8.1 ft³ of mortar for 1,000 modular bricks with ⅜ inch joints before waste. Allow 15–25% for waste, so roughly 9 to 10 ft³.
What is the difference between Type N and Type S mortar?
Both are ASTM C270 types. Type S is stronger and used for below-grade and load-bearing walls, while Type N is a general-purpose mix for above-grade work. Mortar type is set by the designer or code, not by this calculator.
Related calculators
Brick Calculator
Bricks per ft² or m² and the total for a wall.
Concrete Block Calculator
CMU, cinder or besser blocks for a wall.
Tile Calculator
Tiles and boxes for floors and walls, with waste.
Grout Calculator
Grout volume, weight and bags, plus thinset.
Sources and references
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 14 November 2026. See our editorial policy. If you spot a mistake, report it.
Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.