Electricity Cost Calculator

Estimate the cost of electricity for a period as energy in kilowatt-hours, times the unit rate you type, plus an optional standing or fixed charge for the same period. A kilowatt-hour is 1,000 watt-hours. This is arithmetic on the rate and use you type, not a tariff quote and not energy or financial advice. Time-of-use periods, taxes, discounts and demand charges are included only if you have already folded them into the rate or the fixed charge. Confirm figures with your bill or supplier. This page does not invent a tariff.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Electricity cost calculator

–

How to use the electricity cost calculator

  1. Enter the energy in kWh. Take it from your bill, or estimate a device as watts ÷ 1,000 × hours. This page will not look up an appliance table.
  2. Type the unit rate you were charged or quoted. Use the same currency for the rate and the optional standing charge. Enter 0 for the standing charge if you want energy only.
  3. Read the total for that period. The headline is energy charge plus the fixed charge. Confirm it with the bill or the supplier’s tariff.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

The identity

Cost = kWh × unit rate + standing or fixed charge. That is the whole engine. A kilowatt-hour is 1,000 watt-hours, so a device’s energy is roughly watts ÷ 1,000 × hours, if you are estimating rather than reading a meter. The page will not invent a unit rate, a regional average, or a tax table. If your bill has several unit rates, you need to combine them yourself or run the calculator once per period.

The standing-charge box is optional. Leave it at 0 when you only want the energy charge. If your standing charge is quoted per day, multiply by the number of days in the period before you type it, so the fixed amount and the kWh cover the same window.

What is left out

No time-of-use engine, no demand charge, no prepayment surcharge, and no comparison of suppliers. For a solar production sketch, use the solar panel calculator, which also refuses to invent a map or a tariff. For electrical current and power, use the amps-to-watts calculator.

Copy result, Copy link, Reset, Print and Save PDF work as on the other tools. The diagram splits the energy charge and the fixed charge, and is included in the report.

Worked identity (unit-tested)

  • 500 kWh × 0.20 + 0 fixed charge = 100.

That identity is tested against the same TypeScript function the browser runs. Report a mistake from the about box if a product disagrees with the arithmetic above.

Frequently asked questions

What is 500 kWh at 0.20 per kWh, with no standing charge?

100.00 in the same currency as the rate, because 500 × 0.20 = 100. That identity is unit-tested.

How do I include a standing charge?

Type the fixed amount for the same period as the kWh. Daily standing charges should be multiplied by the number of days yourself before you enter them.

Does this look up my tariff?

No. Official rates vary by supplier, region and date, and this page will not invent one. Type the unit rate from your bill or quote.

How do I estimate a single appliance?

Kilowatt-hours ≈ watts ÷ 1,000 × hours the device actually ran. A 1,000 W heater for 2 hours uses about 2 kWh, then multiply by your rate. Real devices vary; this is not a laboratory measurement.

Are taxes and time-of-use periods included?

Only if you have already folded them into the unit rate or the fixed charge. The engine has one rate and one fixed amount.

How does this work with the solar calculator?

The solar page can sketch annual kWh from an array, sun hours and a performance ratio you type. You may bring that energy figure here, with a rate you already know, for a bill-offset sketch. Neither page is a payback study.

Is this financial or energy advice?

No. Confirm any switching or installation decision with your supplier and, where needed, a qualified adviser or installer.

Sources and references

    About this calculator

    Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 15 November 2026. See our editorial policy. If you spot a mistake, report it.

    Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.

    Calculator by CalcTen — free online calculators.