Solar Panel Calculator

Estimate annual energy from a solar array as array size in kilowatts (DC), times the average full-sun hours per day you type, times 365, times a performance ratio you type. A performance ratio of 0.75 is only a starting example for inverter, soiling, temperature and cabling losses, and it is not a certified yield. This page does not look up a location, a weather file, a tariff or a degradation rate. The result is an estimate only, not a design quote, a payback study or financial advice.

By Rashid MehmoodLast updated and reviewed Free, no sign-up

Solar panel calculator

–

How to use the solar panel calculator

  1. Enter the array size in kilowatts DC. Use the DC nameplate you already have or have been quoted. This page will not size a roof for you.
  2. Type sun hours a day and a performance ratio. Sun hours are your figure, not a look-up. The performance ratio is a fraction between 0 and 1; 0.75 is only an editable example.
  3. Optionally type an electricity rate. If you enter a rate per kWh, a bill-offset sketch is shown from the energy figure. Enter 0 to skip. Confirm any installation with a qualified installer and your official tariff.
Embed this calculator

Paste this iframe on your own site. The embed view already includes a visible “Calculator by CalcTen” credit, which must stay visible. See the developers page for the conditions.

The identity

Annual energy in kWh is kW × sun-hours per day × 365 × performance ratio. There is no weather file and no location look-up behind that product. If your sun-hours figure is already a yearly average, 365 days is the usual conversion to a year; leap years and seasonal storage are not modelled. The performance ratio is yours to edit. Leaving it at 0.75 without thinking is a mistake this page will not prevent; the field is labelled as an assumption.

An optional rate turns the energy into a bill-offset sketch. That is still arithmetic, not a tariff quote and not a payback period. Financing, incentives and inverter replacement are omitted.

What is left out

No shading analysis, no azimuth or tilt, no temperature coefficient, no export cap, and no official solar map. Confirm any installation with a qualified installer, your network operator and the tariff you were actually offered. For a bill that starts from measured kWh, use the electricity cost calculator.

Copy result, Copy link, Reset, Print and Save PDF work as on the other tools. The diagram is a simple bar of annual energy, included in the report.

Worked identity (unit-tested)

  • 5 kW × 5 sun-hours × 365 × 0.75 = 6,843.75 kWh.

That identity is tested against the same TypeScript function the browser runs. Report a mistake from the about box if a product disagrees with the arithmetic above.

Frequently asked questions

What is 5 kW at 5 sun-hours a day and a performance ratio of 0.75?

6,843.75 kWh in 365 days, because 5 × 5 × 365 × 0.75 = 6,843.75. That identity is unit-tested.

Where do the sun hours come from?

You type them. This page does not invent a solar map, an NREL file or a city table. Use a figure you already have from a local source or an installer.

What is the performance ratio?

A fraction between 0 and 1 that folds in inverter, soiling, temperature and cabling losses, and any other derating you want to include. 0.75 is only a starting example, not a certified yield or a standard this page imposes.

Is the bill offset a saving guarantee?

No. It is energy times the rate you typed. Export limits, time-of-use rates, standing charges and tax are not modelled unless you have already folded them into that rate.

Does this size the array for my bill?

No. It only multiplies the figures you type. A design needs shading, orientation, structure, permits and an official tariff, which belong with a qualified installer.

Is degradation included?

Only if you have already reduced the performance ratio or the kilowatts to allow for it. This page will not invent a percent-per-year table.

How is this different from the electricity cost calculator?

That tool multiplies kWh you already used (or estimated) by a rate and an optional standing charge. This tool sketches annual production from an array, sun hours and a ratio. You can take the kWh from here into that page if you wish.

Sources and references

    About this calculator

    Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 15 November 2026. See our editorial policy. If you spot a mistake, report it.

    Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.

    Calculator by CalcTen — free online calculators.