Resistor Color Code Calculator
Choose 4-band or 5-band, then pick each band’s colour. The calculator returns the resistance and the tolerance from the IEC 60062 colour code, as summarised on Wikipedia’s electronic colour-code page. The default 4-band reading is brown, black, red, gold: 10 × 100 = 1,000 Ω (1 kΩ) with a ±5% tolerance. Gold and silver are multipliers of 0.1 and 0.01. This tool does not read a photograph; you select the bands, and it does not decode 6-band temperature-coefficient stripes.
Resistor color code calculator
On this calculator: Ctrl+Enter copies the result, Shift+Alt+L copies a link to the current inputs, Shift+Alt+R resets, Shift+Alt+P opens Print / Save PDF. These shortcuts do not run while you type in a field, except Ctrl+Enter.
Saved results on this device
Stored only in this browser, not on our servers.
How to use the resistor color code calculator – 4-band and 5-band
- Choose 4-band or 5-band. 4-band parts have two significant digits, a multiplier and a tolerance. 5-band parts have three significant digits.
- Pick each colour. Read from the end with the tolerance band (usually gold, silver, or a wider gap) at the right.
- Read ohms and tolerance. The value is shown in Ω, kΩ or MΩ, with the tolerance from the last band.
- Check a real part. Colours can fade. If a reading is surprising, measure the resistor with a meter when you can.
How the bands are read
A 4-band resistor carries two significant digits, a multiplier and a tolerance. Each colour from black to white is a digit 0–9. The multiplier is a power of ten (black ×1, brown ×10, red ×100, and so on) with two extras: gold ×0.1 and silver ×0.01. Brown-black-red-gold is therefore 10 × 10² = 1,000 Ω, ±5%.
A 5-band resistor adds a third significant digit before the multiplier, which is how 1% and other closer-tolerance parts are usually marked. The same colour table applies. Brown-black-black-red-brown, for example, is 100 × 100 = 10 kΩ ±1% when the last band is brown.
A missing or “none” tolerance is treated as ±20%, the historical default when no tolerance band was painted. This page does not decode a sixth (temperature-coefficient) band, and it does not invent a letter-code (E12, E24) series beyond telling you the nominal ohms and the tolerance.
IEC 60062 is the standard behind the table; Wikipedia’s electronic colour-code article is the public summary used to fill the colour map on this site (retrieved 15 November 2026). The calculator does not reproduce the standard document. Colours on a real part can fade or sit under a glare; if a reading matters, measure it.
The diagram paints the bands you selected on a simple resistor body. Print / Save PDF keeps the colours, the ohms and the tolerance. The default 1 kΩ ±5% case is unit-tested, as is the 4-band decoder. Report a mistake if a colour-to-digit mapping looks off against the cited table.
Use the Ohm’s law calculator next if you have a voltage and need a current, or the voltage-divider calculator if this resistor is R1 or R2 in a divider.
Frequently asked questions
What is brown-black-red-gold?
Brown = 1, black = 0, red ×100, gold ±5%, so 10 × 100 = 1,000 Ω (1 kΩ) ±5%. That is the default 4-band example.
How is a 5-band resistor decoded?
Three significant digits, then a multiplier, then a tolerance. Brown-black-black-red-gold is 100 × 100 = 10 kΩ ±5%.
What do gold and silver mean as multipliers?
Gold multiplies by 0.1, silver by 0.01. As a tolerance band they are ±5% and ±10%. A missing tolerance band is treated as ±20%.
Which standard are the colours from?
IEC 60062, as summarised on Wikipedia’s “Electronic color code” page (retrieved 15 November 2026). This is not a copy of the standard’s full text.
Can I enter a 6-band temperature coefficient?
No. This page stops at the tolerance band. Temperature-coefficient colours are out of scope.
Does the calculator look at a photo?
No. You choose the colours. Lighting and faded paint make automatic readers unreliable; a meter is the check.
How do I use the value in a circuit?
The Ohm’s law and voltage-divider calculators take a resistance in ohms. Type 1000 for 1 kΩ, or use the kΩ figure as 1,000 Ω.
Related calculators
Ohm’s Law Calculator – Voltage, Current, Resistance and Power
Solve V, I, R and P from any valid pair, using V = I × R and P = V × I.
Voltage Divider Calculator – Vin, R1, R2 and Optional Load
DC voltage divider with optional load: Vout from Vin, R1 and R2.
Voltage Drop Calculator
Volts and percent drop for AWG or mm² cable.
Amps to Watts Calculator
Amps to watts (and watts to amps) for DC, AC and three-phase.
Scientific Calculator – Trig, Logs, Powers and Roots
Trigonometry, logarithms, powers, roots and factorials in degrees or radians, with a printable tape of the working.
Sources and references
About this calculator
Written and maintained by Rashid Mehmood, founder of CalcTen. The formulas are unit-tested against hand-worked examples, and the content is reviewed whenever product sizes or guidance change. Last updated and reviewed 15 November 2026. See our editorial policy. If you spot a mistake, report it.
Results are estimates for planning and ordering. Always check product labels, supplier advice and local building codes, and consult a qualified professional for structural work. Read the disclaimer.